2020 second hand XCMG XE205DA crawler excavator

Product Introduction

The XCMG XE205DA excavator adopts a low-speed, high-torque six-cylinder engine that meets the National III emission standards, which can meet all application requirements; the cylinder section is enlarged, and the digging force is improved; at the same time, the XCMG 205 reduces the start/stop of the stick, the start/stop of the boom, etc. Impact, the whole vehicle shakes little. It is widely used in small and medium-sized earthwork projects, municipal construction, highway and bridge construction, digging ditches, farmland water conservancy construction and other projects.

Product features

1. The XE205DA excavator is equipped with XCMG’s exclusive secret technology – dual electric proportional valves control dual pumps, independent control, different displacements, avoiding throttling loss, and the conversion efficiency is increased by 1% to 2% compared with the previous generation of main pumps, which can Realize oil supply on demand and save energy consumption.

2. XE205DA adopts a custom-made Cummins six-cylinder engine with an effective output power of 135kw, which is quite high power; it has a special energy-saving and consumption-reducing technology, which can improve fuel utilization by about 5% compared with the previous generation model while meeting the National III emission requirements.

3. The characteristic curves of power and fuel consumption customized by XCMG are adopted, and the common speed is set at low speed and high torque, which can achieve lower fuel consumption while maintaining sufficient power.

4. XE205DA enlarges the cross section of the oil cylinder, increases the bucket capacity to 1m3, improves the digging force by more than 5% compared with the previous generation model, and has higher operating efficiency on hard soil, and the walking speed is more than 7% higher than that of XCMG equipment of the same level , The operating efficiency is comprehensively improved.

5. The overall weight of XE205DA is 21,500kg, which is heavier than XCMG equipment of the same level, and the control is more stable. The standard chassis is enlarged and widened, which reduces the impact of stick start/stop, boom start/stop, etc., plus upgrade and optimization The wheelbase and track gauge have been improved, the vehicle shakes less, and the stability is superior.

6. After the XE205DA has undergone the lengthening and widening of the chassis, the strengthening of the large and small arms, and the increase of the bucket capacity, the body is more rugged, but it does not affect the flexibility. On the contrary, it has been verified by the market that the walking and turning speeds of this model are faster, and the movements are more coherent. . It has more advantages in leveling operations, coordinated movements, and smooth control. Compared with large-tonnage products, the gap between the bucket teeth is smaller, and the leveling effect is better.

7. In order to improve the driver’s control comfort, XE205DA adopts integrated control panel, multi-mode control, new shock absorption technology, many safety protection facilities and luxury interior of car level.