Second Hand HOWO 375hp 8×4 Dump Trucks

Short Description:

Driving form: 8X4

Wheelbase: 1800+4600+1350mm

Engine: China National Heavy Duty Truck D10.38-50

Transmission: China National Heavy Duty Truck HW19712

Rear axle speed ratio: 5.45

Length: 11.145 meters

Width: 2.496 meters

Height: 3.45 meters

Front wheelbase: 2022/2022mm

Rear wheelbase: 1830/1830mm

Overall weight: 15.5 tons

Rated load capacity: 15.37 tons

Gross mass: 31 tons


Product Detail

Product Tags

Product Description

- The powertrain of HOWO series heavy trucks is a fully upgraded Weichai Power China Heavy Duty Truck special engine;

- The whole power is divided into 266ps, 290ps, 336ps, 371ps, 420ps, and the power grading is more reasonable, which meets both GB7258-2004 and GB1589-2004;

- Powerful engine supercharger and then add a bleeder valve, so that the low-speed operation of the torque is greater, faster speed, climbing ability is stronger, the whole vehicle fuel consumption is reduced by 10%, the common working conditions of construction vehicles fuel consumption is lower;

- The intake and exhaust systems are fully in line with those of European heavy trucks. The air intake and exhaust system is fully in line with that of European heavy trucks. The intake and exhaust system is smoother and more efficient, which greatly improves the life of the engine and reduces the fuel consumption in all aspects;

- Dump trucks are equipped with special engines, because the engines of dump trucks are often in low-speed state, adopting the patented technology of China National Heavy Duty Truck Corporation (CNHTC), which makes the engines realize high efficiency and fuel saving in low speed, and reduces the operation cost to the majority of users in a real way;

- The emission is in full compliance with the requirements of national Euro II regulations, and can reach Euro III standard after adjustment. The technical level of the whole engine is in the dominant position of domestic heavy truck engines;

- The key parts of the engine utilize a large number of special technologies, and the special technologies and supporting parts have greatly improved the reliability of the whole engine through the overload test. In particular, the weak points of the cylinder block have been improved so that the cylinder block can withstand higher burst pressure.


  • Previous:
  • Next:

  • Write your message here and send it to us